toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Steering|Tie Rod > < Repair Manual Corrections -Torque for Steering Wheel Nut|Page 6722
Page 1
background image

Steering Wheel: Testing and Inspection

STEERING EFFORT

1. Center steering wheel.
2. Measure steering effort.

a. Remove the steering wheel pad.
b. Start the engine and run it at idle.
c. Measure the steering effort in both directions.

Reference:  5.9 Nm (52 inch lbs.).

NOTE:  Be sure to consider the tire type, pressure and contact surface before making your diagnosis.

d. Torque the steering wheel set nut.

[torque:  35 Nm (26 ft. lbs.)].

e. Install the steering wheel pad.

STEERING WHEEL FREEPLAY

With the vehicle stopped and tires pointed straight ahead, rock the steering wheel gently back and forth with light finger pressure. Freeplay should not
exceed the maximum.

Maximum Freeplay:  30 mm (1.18 inch).

Steering|Tie Rod > < Repair Manual Corrections -Torque for Steering Wheel Nut|Page 6722