Camry CE Sedan 4-Door L4-2164cc 2.2L DOHC MFI (1997)
a. Using Special Service Tool (SST) 09727 - 30021, compress the coil spring.
CAUTION: Do not use an impact wrench. It will damage the SST.
b. Install the coil spring to the shock absorber.
NOTE: Fit the lower end of the coil spring into the gap of the spring lower seat.
4. Install suspension support.
a. Install the suspension support to the piston rod and temporarily tighten a new nut.
b. Rotate the suspension support and set it in the direction shown in the illustration.
c. Remove the SST 09727 - 30021.
NOTE: After removing SST, again check the direction of the suspension support.