Camry CE Sedan 4-Door L4-2164cc 2.2L DOHC MFI (1997)
Input Shaft: Service and Repair
DISASSEMBLY
1. Inspect 3rd and 4th gears thrust clearance.
-
Using a feeler gauge, measure the clearance.
Standard clearance:
-
3rd gear: 0.10-0.25 mm (0.0039-0.0098 inch).
-
4th gear: 0.20-0.45 mm (0.0079-0.0177 inch).
Maximum clearance:
-
3rd gear: 0.30 mm (0.0118 inch).
-
4th gear: 0.50 mm (0.0197 inch).
2. Inspect 3rd and 4th gears radial clearance.
-
Using a dial indicator, measure the radial clearance between the gear and shaft.
Standard clearance: 0.009 0.053 mm (0.0004 0.0021 inch).
Maximum clearance: 0.070 mm (0.0028 inch).
