Camry CE Sedan 4-Door L4-2164cc 2.2L DOHC MFI (1997)
HINT: Position the identification groove of the hub sleeve to the front of the transmission.
2. Install thrust washer, 1st gear, needle roller bearing, synchronizer [king and no.1 hub sleeve to output shaft.
a. Using SST and a press, install the thrust washer.
SST 09316 - 60011 (09316 - 00041)
b. Apply gear oil to the needle roller bearing.
c. Place the synchronizer ring on the gear and align the ring slots with the shifting keys.
d. Using a press, install the 1st gear and No.1 hub sleeve.
3. Inspect 1st gear thrust clearance.
4. Install synchronizer ring, 2nd gear, needle roller bearing and 3rd driven gear.
a. Install the ball.
b. Fit the 2nd gear bushing groove securely over the ball when installing the 2nd gear bushing on the shaft.
c. Place the synchronizer rings on the 2nd gear.