Camry CE Sedan 4-Door L4-2164cc 2.2L DOHC MFI (1997)
a. Connect the positive (+) lead from the battery to termir1 and the negative (-) lead to terminal 2, and check that the motor turns clockwise.
b. Reverse the polarity, and check that the motor turns counterclockwise.
If operation is not as specified, replace the motor.
2. INSPECT POWER WINDOW MOTOR CIRCUIT BREAKER OPERATION
Driver's Door:
a. Disconnect the connector from the master switch.
b. Connect the positive (+) lead from the battery to terminal 3 and the negative (-) lead to terminal 6 on the wire harness side connector and raise
the window to full closed position.
c. Continue to apply voltage, check that there is a circuit breaker operation noise within approximately 4 to 40 seconds.