Camry Coupe 2-Door L4-132 2164cc 2.2L DOHC (5S-FE) (1995)
/Page-407004.png)
g. Apply Mp grease to a new oil seal lip.
h. Using SST 09223-46011, tap in the oil seal.
2. Install exhaust camshaft
a. Set the knock pin of the intake camshaft at 10 - 45° BTDC of camshaft angle.
NOTE: The above angle allows the No.2 and No.4 cylinder cam lobes of the exhaust camshaft to push their valve liters evenly.
b. Apply Mp grease to the thrust portion of the camshaft.
c. Engage the exhaust camshaft gear to the intake camshaft gear by matching the timing marks on each gear.
d. Roll down the exhaust camshaft onto the bearing journals while engaging gears with each other.
NOTE: There are also assembly reference marks on each gear as shown in the illustration. Do not use these marks.
