Camry Coupe 2-Door L4-132 2164cc 2.2L DOHC (5S-FE) (1995)
(a) Temporarily install the engine moving control rod with the 3 bolts in the sequence shown.
(b) Tighten the 3 bolts in the sequence shown.
Torque: 84 Nm (650 kgf-cm. 47 ft-lb)
18. INSTALL AND ADJUST PS PUMP DRIVE BELT
19. INSTALL RH FENDER APRON SEAL
20. INSTALL RH FRONT WHEEL
21. INSTALL GENERATOR
22. INSTALL RADIATOR RESERVOIR