Camry Coupe 2-Door L4-132 2164cc 2.2L DOHC (5S-FE) (1995)
Exhaust Manifold: Service and Repair
1.
On models with coded audio anti-theft systems, refer to Technician Safety Information for code procedures.
2.
Disconnect battery ground cable.
3.
Remove exhaust pipe from exhaust manifold.
4.
Disconnect all electrical connectors, hoses, cables, fuel lines and electrical equipment that will interfere with removal of exhaust manifold.
5.
Remove lower insulators, and if necessary, catalytic converter.
6.
Remove exhaust manifold attaching bolts, then exhaust manifold and gasket.
7.
Reverse procedure to install, noting the following:
8.
Tighten fasteners to specifications.
9.
Reset audio anti-theft system, if necessary, as outlined under Technician Safety Information.