Camry Coupe 2-Door L4-132 2164cc 2.2L DOHC (5S-FE) (1995)
d. Remove the shims from the pressure plate.
2. Remove rotor.
a. Using a SST 07114-84020 remove the snap ring.
CAUTION: Do not spread the point of SST widely. Max width: 23.1 mm
NOTE: The snap ring should be installed so that its beveled side faces up.
b. Using a plastic hammer, tap the rotor off the shaft.
NOTE: Be careful not to damage the pulley when tapping on the rotor.