Camry Coupe 2-Door L4-132 2164cc 2.2L DOHC (5S-FE) (1995)
Wide open throttle
VTA - E2
2.0 - 10.2 k Ohms
Always
VC - E2
2.5 - 5.9 k Ohms
4. IF NECESSARY, ADJUST THROTTLE POSITION SENSOR.
-
Loosen the 2 set screws of the sensor.
-
Apply vacuum to the Throttle Opener.
-
Insert a 0.60 mm (0.024 in) thickness gauge between the throttle stop screw and stop lever.
-
Connect the test probe of an ohmmeter to the terminals IDL and E2 of the sensor.
-
Gradually turn the sensor clockwise until the ohmmeter deflects, and secure the sensor with the 2 set screws.
-
Recheck the continuity between terminals IDL and E2.
Clearance between
Between
Resistance
lever and stop screw
terminals
0.50 mm (0.020 in)
IDL - E2
Continuity
0.70 mm (0.028 in)
IDL - E2
No continuity