Camry Coupe 2-Door L4-132 2164cc 2.2L DOHC (5S-FE) (1995)
-
Connect the 3 wires to the ignition coil terminals with the 2 nuts.
NOTICE:
-
When connecting the wires to the ignition coil, insert both properly into their grooves found on the side of the ignition coil.
-
Be sure the wires do not contact with signal rotor or distributor housing.
4. INSTALL IGNITION COIL DUST COVER.
5. INSTALL ROTOR.
6. INSTALL DISTRIBUTOR CAP AND HIGH-TENSION CORDS.