Camry Coupe 2-Door V6-3.0L (1MZ-FE) (1996)
/Page-865001.png)
Transmission Position Switch/Sensor: Service and Repair
PARK/NEUTRAL POSITION SWITCH REPLACEMENT
1. DISCONNECT PARK/NEUTRAL POSITION SWITCH CONNECTOR
2. REMOVE PARK/NEUTRAL POSITION SWITCH
-
Remove the clip from the shift control cable.
-
Remove the nut and control cable.
-
Remove the transaxle control shaft lever.
-
Remove the park/neutral position switch.
3. INSTALL AND ADJUST PARK/NEUTRAL POSITION SWITCH
-
Install the park/neutral position switch.
