Camry Coupe 2-Door V6-3.0L (1MZ-FE) (1996)
/Page-958003.png)
-
Remove the 3 bolts, RH delivery pipe together with the 3 injectors and No.1 fuel pipe.
-
Remove the 4 spacers from the intake manifold.
-
Pull out the 6 injectors from the delivery pipes.
-
Remove the 2 O-rings and 2 grommets from each injector.
INJECTORS INSTALLATION
1. INSTALL INJECTORS AND DELIVERY PIPES
-
Install new insulator and grommet to each injector.
-
Apply a light coat of spindle oil or gasoline to 2 new O-rings and install them to each injector.
-
While turning the injector clockwise and counter clock wise, push it to the delivery pipes. Install the 6 injectors.
-
Position the injector connector outward.
-
Place the 4 spacers in position on the intake manifold.
