Camry Coupe 2-Door V6-3.0L (1MZ-FE) (1996)
/Page-965002.png)
(a) Apply a light coat of gasoline to a new O-ring, an install it to the pressure regulator.
(b) Attach the pressure regulator to the delivery pipe.
(c) Check that the pressure regulator rotates smoothly.
NOTICE: If it does not rotate smoothly, the O-ring may be pinched. so remove the pressure regulator and repeat steps (a) to (c).
-
Install the pressure regulator with the 2 bolts.
Torque: 8 Nm (80 kgf.cm; 69 in.lb)
