Camry Coupe 2-Door V6-3.0L (1MZ-FE) (1996)
/Page-996001.png)
Fuel Pump Relay: Testing and Inspection
CIRCUIT OPENING RELAY INSPECTION
1. REMOVE CIRCUIT OPENING RELAY
2. INSPECT CIRCUIT OPENING RELAY
A. Inspect relay continuity
-
Using an ohmmeter, check that there is continuity between terminals ST and E1.
-
Check that there is continuity between terminals +B and FC.
-
If there is no continuity, replace the relay.
-
Check that there is no continuity between terminals +B and FP.
-
If there is continuity, replace the relay.
B. Inspect relay operation
-
Apply battery positive voltage across terminals ST and E1.
-
Using an ohmmeter, check that there is continuity between terminals +B and FP.
-
If there is no continuity, replace the relay.
