Camry Coupe 2-Door V6-3.0L (1MZ-FE) (1996)
/Page-637001.png)
Crankshaft Position Sensor: Service and Repair
CRANKSHAFT POSITION SENSOR REMOVAL
1. REMOVE RH FENDER APRON SEAL
2. REMOVE CRANKSHAFT POSITION SENSOR
(a) Disconnect the crankshaft position sensor connector.
Torque: 8 Nm (80 kgf.cm, 69 in.lb)
(b) Remove the bolt and remove the crankshaft position sensor.
CRANKSHAFT POSITION SENSOR INSTALLATION
-
INSTALLATION IS IN THE REVERSE ORDER OF REMOVAL.
