Camry Coupe 2-Door V6-3.0L (1MZ-FE) (1996)
Air Bag Control Module: Testing and Inspection
CENTER AIRBAG SENSOR ASSEMBLY INSPECTION
Vehicles Not Involved In A Collision
1. Do a diagnostic system check.See: Air Bag Systems/Testing and Inspection/Reading and Clearing Diagnostic Trouble Codes/Displaying &
Reading Trouble Codes/Without Scan Tool
Vehicles Involved In A Collision
1. If the SRS is not deployed.
Do a diagnostic system check.
2. If the SRS is deployed.
Replace the center airbag sensor assembly.
Replacement Requirements
In the following cases, replace the center airbag sensor assembly.
-
If the SRS has been deployed in a collision.
-
If the center airbag sensor assembly has been found to be faulty in troubleshooting.
-
If the center airbag sensor assembly has been dropped.
NOTICE: For replacement of the center airbag sensor assembly, see "CENTER AIRBAG SENSOR ASSEMBLY SERVICE AND REPAIR" and be
sure to follow the correct procedure.
See: Air Bag Systems/Impact Sensor/Service and Repair