Camry Coupe 2-Door V6-3.0L (1MZ-FE) (1996)
-
Remove the 9 bolts, 2 nuts, 2 plate washers and intake manifold assembly.
5. REMOVE RH ENGINE MOUNTING STAY AND WATER OUTLET
-
Disconnect these hoses and connectors:
(1) Radiator inlet hose
(2) Radiator reservoir hose
(3) ECT sensor connector
(4) ECT switch connector
(5) Ground strap connector
-
Remove the 3 bolts and RH mounting stay.
-
Remove the wire band.
-
Disconnect the water bypass hose from the inlet housing.
-
Remove the 2 bolts, 2 nuts, 2 plate washers and water outlet.
-
Remove the 2 gaskets.
6. REMOVE KNOCK SENSORS
-
Disconnect the knock sensor connector.