Camry Coupe 2-Door V6-3.0L (1MZ-FE) (1996)
/Page-198002.png)
-
Using an ohmmeter, measure the resistance between terminals THA and E2.
-
If the resistance is not as specified, replace the MAF meter.
2. INSPECT MAF METER OPERATION
-
Connect the MAF meter connector.
-
Using a voltmeter, connect the positive (+) tester probe to terminal VG, and negative (-) tester probe to terminal VG-.
-
Blow air into the MAF meter, and check that the voltage fluctuates.
-
If operation is not as specified, replace the MAF meter.
-
Disconnect the MAF meter connector.