toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Parking Brake Shoe > < Wheel Cylinder|Service and Repair
Page 1
background image

Parking Brake Lever: Testing and Inspection

ON-VEHICLE INSPECTION 

1. CHECK THAT PARKING BRAKE LEVER TRAVEL

Pull the parking brake lever all the way up, and count the number of clicks.
Parking brake lever travel at 196 N (20 kgf, 44.1 lbs): 5 - 8 clicks 

If incorrect, adjust the parking brake.

2. IF NECESSARY, ADJUST PARKING BRAKE LEVER TRAVEL

HINT:  Before adjusting the parking brake lever travel, make sure the the rear brake shoe clearance has been adjusted. 

a. Remove the console box.
b. Loosen the lock nut and adjust the adjusting nut until the lever travel is correct.
c. Tighten the lock nut.

Torque: 5.4 Nm (55 kgf-cm, 48 inch lbs.) 

D. Install the console box.

Parking Brake Shoe > < Wheel Cylinder|Service and Repair