Camry LE Sedan L4-2164cc 2.2L DOHC (5S-FE) MFI (2000)
_mfi/Page-1007002.png)
b. Set the SST on the gasket, and lower the pin until its tip slightly touches the piston.
SST 09737-00010
c. Turn the SST upside down, and set it on the booster.
SST 09737-00010
d. Measure the clearance between the booster push rod and pin head (SST).
Clearance: 0 mm (0 inch)
e. Adjust the booster push rod length until the push rod lightly touches the pin head.
3. INSTALL CHARCOAL CANISTER TO ORIGINAL POSITION
4. INSTALL MASTER CYLINDER
5. INSTALL AIR CLEANER COVER WITH AIR CLEANER HOSE
6. CONNECT VACUUM HOSE TO BRAKE BOOSTER
7. FILL BRAKE RESERVOIR WITH BRAKE FLUID AND BLEED BRAKE SYSTEM
See: Brake Bleeding
8. CHECK FOR FLUID LEAKAGE
9. CHECK AND ADJUST BRAKE PEDAL
See: Brake Pedal Assy/Testing and Inspection
10. DO OPERATIONAL CHECK
See: Testing and Inspection
