toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Blower Motor|Removal and Installation|Page 4677 > < Blower Motor|Removal and Installation|Page 4675
Page 3
background image

5. REMOVE ECM

a. Disconnect the connectors.
b. Remove the 2 nuts and ECM.

6. 1MZ-FE engine manual A/C only:

REMOVE A/C AMPLIFIER.
a. Disconnect the connector.
b. Release the 2 claws and pull out the amplifier.

7. REMOVE AIR DUCT RH (Foot)

Release the 2 claws and remove the air duct.

8. REMOVE CONNECTOR BRACKET SET SCREWS

9. REMOVE BLOWER UNIT

a. Disconnect the connector.
b. Disconnect the evaporator temperature sensor connector clamp.
c. Remove the 2 screws, bolt and nut, then remove the blower unit.

INSTALLATION

Installation is in the reverse order of removal.

Blower Motor|Removal and Installation|Page 4677 > < Blower Motor|Removal and Installation|Page 4675