toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Stop Light Switch <--> [Brake Light Switch] > < Symptom Related Diagnostic Procedures|Page 6308
Page 2
background image

2. W/ Cruise control:

INSPECT STOP LIGHT SWITCH CONTINUITY
It continuity is not as specified, replace the switch.

3. INSPECT HI-MOUNTED STOP LIGHT ASSEMBLY CONTINUITY

Using the ohmmeter, check that continuity exists between terminals.
If continuity is not as specified, replace the bulb or light assembly.

4. INSPECT LIGHT FAILURE RELAY CIRCUIT

Disconnect the connector from the relay and inspect the connector on the wire harness side, as shown.
If the circuit is as specified, replace the relay.
If the circuit is not as specified, inspect the circuits connected to other parts.

Stop Light Switch <--> [Brake Light Switch] > < Symptom Related Diagnostic Procedures|Page 6308