Camry LE Sedan L4-2164cc 2.2L DOHC (5S-FE) MFI (2000)
Manifold Absolute Pressure Sensor: Testing and Inspection
COMPONENTS
INSPECTION
1. INSPECT POWER SOURCE VOLTAGE OF MAP SENSOR
a. Disconnect the MAP sensor connector.
b. Turn the ignition switch ON.
c. Using a voltmeter, measure the voltage between connector terminals VC and E2 of the wiring harness side.
-
Voltage: 4.5 - 5.5 V
d. Turn the ignition switch OFF.
e. Reconnect the MAP Sensor connector.
2. INSPECT POWER OUTPUT OF MAP SENSOR
a. Turn the ignition switch ON.