Camry LE Sedan L4-2164cc 2.2L DOHC (5S-FE) MFI (2000)
_mfi/Page-809001.png)
Knock Sensor: Testing and Inspection
COMPONENTS
INSPECTION
1. REMOVE KNOCK SENSOR 1
a. Disconnect the knock sensor connector.
b. Using SST, remove the knock sensor.
SST 09816-30010
2. INSPECT KNOCK SENSOR 1
Using an ohmmeter, check that there is no continuity between the terminal and body.
If there is continuity, replace the sensor.
3. REINSTALL KNOCK SENSOR 1
