Camry LE Sedan L4-2164cc 2.2L DOHC (5S-FE) MFI (2000)
_mfi/Page-529003.png)
c. Remove the bolt and sensor.
3. REINSTALL CRANKSHAFT POSITION SENSOR
a. Install the sensor with the bolt.
-
Torque: 9.5 Nm (97 kg.cm, 84 in.lb)
b. Install the sensor connector to the generator drive belt adjusting bar.
c. Connect the sensor connector.
4. REINSTALL NO.1 TIMING BELT COVER
