Camry LE Sedan L4-2164cc 2.2L DOHC (5S-FE) MFI (2000)
_mfi/Page-588003.png)
b. Determine the replacement adjusting shim size by following the Formula or Charts:
1) Using a micrometer, measure the thickness of the removed shim.
2) Calculate the thickness of a new shim so that the valve clearance comes within specified value.
T: Thickness of removed shim
A: Measured valve clearance
N: Thickness of new shim
Intake: N = T + (A - 0.24 mm (0.009 inch))
Exhaust: N = T + (A - 0.33 mm (0.01 3 inch))
3) Select a new shim with a thickness as close as possible to the calculated value.
HINT: Shims are available in 17 sizes in increments of 0.05 mm (0.0020 inch), from 2.50 mm (0.0984 inch) to 3.30 mm (0.1299 inch).
