Camry LE Sedan L4-2164cc 2.2L DOHC (5S-FE) MFI (2000)
_mfi/Page-1384002.png)
CAUTION: When deploying the seat belt pretensioner, always use the specified SST: SRS Airbag Deployment Tool.
SST 09082-00700, 09082-00740
1. Connect the SST to battery.
Connect the red clip of the SST to the battery positive (+) terminal and the black clip to the battery negative (-) terminal.
HINT: Do not connect the yellow connector which will be connected with the seat belt pretensioner.
2. Check functioning of SST
Press the SST activation switch, and check the LED of the SST activation switch lights up.
CAUTION: If the LED lights up when the activation switch is not being pressed, SST malfunction is probable, so definitely do not use
the SST.
b. Install the SST.
1. Remove the front door scuff plate.
2. Remove the center pillar lower garnish.
3. Disconnect the pretensioner connector as shown in the illustration.
4. Buckle the front seat belt and check that there is no looseness and slack in the front seat inner belt and front seat outer belt.
SST 09082-00700, 09082-00740
