Camry LE Sedan L4-2164cc 2.2L DOHC (5S-FE) MFI (2000)
Starter Motor: Service and Repair
Removal and Installation
REMOVAL
1. REMOVE BATTERY AND TRAY
2. W/ CRUISE CONTROL SYSTEM:
REMOVE CRUISE CONTROL ACTUATOR
a. Disconnect the actuator connector and clamp.
b. Remove the 3 bolts, and disconnect the actuator with the bracket.
3. REMOVE STARTER
a. Disconnect the starter connector.
b. Remove the 2 bolts, throttle cable clamp (A/T) and starter.
c. Remove the nut, and disconnect the starter cable.
Torque: 37 Nm (380 kg.cm, 27 ft.lb)
INSTALLATION
Installation is in the reverse order of removal.