Camry LE Sedan L4-2164cc 2.2L DOHC (5S-FE) MFI (2000)
5S-FE and 1MZ-FE Engines:
Inscribed mark: 1, 2, 3, 4 or None
HINT: There are 5 vane lengths with the following rotor and cam ring marks:
5S-FE and 1MZ-FE Engines:
3. INSPECT FLOW CONTROL VALVE
a. Coat the valve with power steering fluid and check that it falls smoothly into the valve hole by its own weight.
b. Check the valve for leakage. Close one of the holes and apply 392 - 490 kPa (4 - 5 kgf/cm2, 57 - 71 psi) of compressed air into the opposite
side, and confirm that air does not come out from the end holes.