toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Component Tests and General Diagnostics|Page 4316 > < Component Tests and General Diagnostics|Page 4314
Page 5
background image

g. Disconnect the negative (-) lead from the battery to terminal 5.
h. Check that the buzzer stops sounding.

If operation is not as specified, replace the relay.

5. Key unlock warning system:

INSPECT INTEGRATION RELAY (TYPE C) OPERATION

a. Connect the positive (+) lead from the battery to terminal 1.
b. Connect the negative (-) lead from the battery to terminals 5, 6 and 10.

d. Disconnect the negative (-) lead from the battery to terminal 6.
e. Check that the buzzer stops sounding.

f.

Connect the negative (-) lead from the battery to terminal 6.

g. Disconnect the negative (-) lead from the battery to terminal 5.
h. Check that the buzzer stops sounding.

If operation is not as specified, replace the relay.

6. INSPECT INTEGRATION RELAY (TYPE A) CIRCUIT

Component Tests and General Diagnostics|Page 4316 > < Component Tests and General Diagnostics|Page 4314