Camry LE Sedan L4-2164cc 2.2L DOHC (5S-FE) MFI (2000)
(a)
Look at the axle hub flange to determine if the hub is Type A, Type B, or Type C.
NOTE:
^
Type A: The groove is on the outside of the flange.
^
Type B: No groove on the flange.
^
:Type C: The groove is in the center of the flange.
(b)
If either hub is Type A = Replace Hub. Proceed to Section B, B, REAR AXLE HUB REMOVAL.
(c)
If both hubs are Type B or Type C the vehicle is not affected by this SSC. Skip to Section D BRAKE REINSTALLATION.
NOTE:
Type A = NG (REPLACE)
Type B = OK
Type C = OK
B.
REAR AXLE HUB REMOVAL
1.
REMOVE THE REAR AXLE HUB ASSEMBLY
(a)
Remove the 4 bolts and rear axle hub.