Camry LE Sedan L4-2164cc 2.2L DOHC (5S-FE) MFI (2000)
_mfi/Page-885002.png)
Set up a dial indicator and measure the torque converter clutch sleeve runout.
Maximum runout: 0.30 mm (0.0118 inch)
If the runout is not within the specification, try to correct by reorienting the installation of the torque converter clutch. If excessive runout
cannot be corrected, replace the torque converter clutch.
HINT: Mark the position of the torque converter clutch to ensure the correct installation.
b. Remove the torque converter clutch.
