Camry LE Sedan L4-2164cc 2.2L DOHC (5S-FE) MFI (2000)
A.
Remove the 4 bolts and rear axle hub.
Torque: 80 N.m (820 kgf.cm, 59 ft.lbf)
B.
Remove the 0-ring.
HINT:
At the time of installation, coat the new 0-ring with MP grease.
NOTE:
Please ensure that the 0-ring is replaced with a new service part when installing the bearing assembly.
C.
With Drum Brake:
Remove the bolt, and disconnect the flexible hose from the shock absorber.
Torque: 29 N.m (300 kgf.cm, 22 ft.lbf)
D.
Support the backing plate securely.
5.
With ABS:
Remove ABS Speed Sensor Torque: 8.0 N.m (82 kgf.cm, 71 in.lbf)
INSTALLATION
Installation is in the reverse order of removal.