Camry LE Sedan L4-2164cc 2.2L DOHC (5S-FE) MFI (2000)
a. Set the window lock switch to the unlock position.
b. Connect the positive (+) lead from the battery to terminal 8 and the negative (-) lead to terminal 4, and check that all the illuminations light up.
c. Set the window lock switch to the lock position, check that all the passenger's power window switch illuminations go out.
If operation is not as specified, replace the master switch.
INSPECT POWER WINDOW MASTER SWITCH CIRCUIT
Disconnect the connector from the master switch and inspect the connector on the wire harness side, as shown in the following.
If the circuit is not as specified, inspect the circuits connected to other parts.
Front passenger's door:
INSPECT POWER WINDOW SWITCH CONTINUITY
If continuity is not as specified, replace the switch.