Camry LE Sedan V6-3.0L (1MZ-FE) (1998)
/Page-1513003.png)
o. Push and hold in the MOTOR switch for a few seconds.
p. Stop the engine.
5. Disconnect actuator checker SST 09990-00150, 09990-00163, 09990-0025Q, 0999-00360, 09990-00450, from actuator.
Remove the "SHEET A" (SST) and disconnect the actuator checker (SST) and sub-wire harness (SST) from the actuator.
6. Connect connectors.
Connect the 2 connectors to the actuator.
7. Clear DTC. Refer to Antilock Brake System / System Diagnosis for reset procedure and further testing.
