Camry LE Sedan V6-3.0L (1MZ-FE) (1998)
Malfunction Indicator Lamp: Testing and Inspection
MIL INSPECTION
(a) Check the MIL
(1) The MIL comes on when the ignition switch is turned ON and the engine is not running.
HINT: If the MIL does not light up, troubleshoot the combination meter.
(2) When the engine started, the MIL should go off. If the lamp remains on, the diagnosis system has detected a malfunction or abnormality in the
system. Refer to Powertrain Management / Computers and Control Systems / Testing and Inspection / How to display and Read
Diagnostic Trouble Codes. See: Powertrain Management/Computers and Control Systems/Testing and Inspection