Camry LE Sedan V6-3.0L (1MZ-FE) (1998)
/Page-334002.png)
(c) When connecting the flare nut on the high pressure pipe union, observe these procedures:
(1) Apply a light coat of engine oil to the flare nut and tighten the flare nut by hand.
(2) Using SST, tighten the flare nut to specified torque. SST 09631-22020
NOTICE: Do not rotate the fuel pipe, when tightening the flare nut.
Torque: 28 N.m (285 kgf.cm, 21 ft.lbf) for using SST
HINT: Use a torque wrench with a fulcrum length of 30 cm (11.81 in.).
