Camry LE Sedan V6-3.0L (1MZ-FE) (1998)
3) Using Special Service Tool (SST) 09248 - 55040 (09248 - 05410, 09248 - 05420) (A) or equivalent, press down the valve lifter and place
SST (B) between the camshaft and valve lifter. Remove SST (A).
HINT:
-
Apply SST (B) at a slight angle on the side marked with "9" or "7", at the position shown in the illustration.
-
When SST (B) is inserted too deeply, it will get pinched by the shim. To prevent it from being stuck, insert it gently from the intake side, at
a slight angle.
-
Using a small screwdriver and magnetic finger, remove the adjusting shim.