Camry LE Sedan V6-3.0L (1MZ-FE) (1998)
/Page-1246001.png)
Transmission Speed Sensor: Service and Repair
ON-VEHICLE REPAIR
1. DISCONNECT DIRECT CLUTCH SPEED SENSOR CONNECTOR
2. REMOVE DIRECT CLUTCH SPEED SENSOR
a. Remove the bolt and direct clutch speed sensor.
b. Remove the O-ring from direct clutch speed sensor.
3. INSTALL DIRECT CLUTCH SPEED SENSOR
a. Coat a new O-ring with Automatic Transmission Fluid (ATF) and install it to the direct clutch speed sensor.
b. Install the direct clutch speed sensor with the bolt.
Torque: 11 Nm (110 kgf-cm, 8 ft. lbs.)
