Camry LE Sedan V6-3.0L (1MZ-FE) (1998)
/Page-296001.png)
Seat Belt Buckle Switch: Testing and Inspection
w/o Power Seat:
INSPECT BUCKLE SWITCH CONTINUITY
a. Check that continuity exists between the terminals on the switch side connector with the switch ON (belt fastened).
b. Check that no continuity exists between the terminals on the switch side connector with the switch OFF (belt unfastened).
If operation is not as specified, replace the seat belt inner belt.
w/ Power Seat:
INSPECT BUCKLE SWITCH CONTINUITY
a. Check that continuity exists between terminals 1 and 2 on the switch side connector with the switch ON (belt fastened).
b. Check that no continuity exists between terminals 1 and 2 on the switch side connector with the switch OFF (belt unfastened).
If operation is not as specified, replace the seat belt inner belt.
