toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Suspension > < Repair Manual Corrections -Torque for Steering Wheel Nut|Page 6602
Page 1
background image

Steering Wheel: Testing and Inspection

INSPECTION 

1. Check steering wheel freeplay. 

With the vehicle stopped and tires pointed straight ahead, rock the steering wheel gently back and forth with light finger pressure. Freeplay should
not exceed the maximum.

Maximum Freeplay:  30 mm (1.18 inch).

1. Check steering effort.

a. Center steering wheel.
b. Remove the steering wheel pad.
c. Start the engine and run it at idle.
d. Measure the steering effort in both directions.

Reference:  5.9 Nm (52 inch lbs.).

NOTE:  Be sure to consider the tire type, pressure and contact surface before making your diagnosis.

e. Torque the steering wheel set nut.

[torque:  35 Nm (26 ft. lbs.)].

f.

Install the steering wheel pad.

Suspension > < Repair Manual Corrections -Torque for Steering Wheel Nut|Page 6602