Camry LE Sedan V6-3.0L (1MZ-FE) (1998)
/Page-1330007.png)
Y = Yellow
The first letter indicates the basic wire color and the second letter indicates the color of the stripe.
Example: L-Y
Splice Point
K: Indicates a wiring Splice Point (Codes are "E" for the Engine Room, "I" for the Instrument Panel, and "B" for the Body).
The Location of Splice Point I 5 is indicated by the shaded section.
L: Page No.
Shielded Cable
M: Indicates a shielded cable.
N: Indicates a ground point.
The first letter of the code for each ground point(s) indicates the components location, e.g, "E" for the Engine Compartment, "I" for the Instrument
Panel and Surrounding area, and "B" for the Body and Surrounding area.
Pin Number Of The Connector
O: Indicates the pin number of the connector.
The numbering system is different for female and male connectors.
Example: Numbered in order
Numbered in order
from upper left to
from upper right to
lower right
lower left
P: When 2 parts both use one connector in common, the parts connector name used in the wire routing section is shown in square brackets [ ].
