Camry LE Sedan V6-3.0L (1MZ-FE) (1998)
/Page-1387001.png)
Clutch Master Cylinder: Service and Repair
REMOVAL
1. DRAW OUT FLUID WITH SYRINGE
2. DISCONNECT CLUTCH LINE
Using Special Service Tools (SST), disconnect the clutch line. Use a container to catch the fluid. SST 09023-00100
Torque: 15 Nm (155 kgf-cm, 11 ft. lbs.)
3. REMOVE CLIP AND CLEVIS PIN
4. REMOVE 2 MOUNTING NUTS AND PULL OUT MASTER CYLINDER
Torque: 12 Nm (120 kgf-cm, 9 ft. lbs.)
DISASSEMBLY
1. REMOVE RESERVOIR TANK
a. Using a pin punch and hammer, drive out the slotted spring pin.
b. Remove the reservoir tank and grommet.
