Camry LE Sedan 4-Door L4-2164cc 2.2L DOHC MFI (1997)
1. Install fan motor.
(a)
Install the fan motor with the 3 screws.
(b) Install the wire and connector to the fan shroud.
2. Install fan.
Install the fan with the nut.
Installation
1. Install No. 1 cooling fan.
a. Attach the lower side of the cooling fan to the bracket of the radiator.
b. Install the cooling fan with the two bolts.
Torque: 5.0 Nm (43 inch lbs.)
c. Install the wire and connector holder for the ECT switch to the fan shroud.
d. Connect the ECT switch connector.
2. Connect the upper radiator hose to radiator.
3. Fill with engine coolant.
4. Start engine and check for coolant leaks.
