toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Air Duct > < A/C - Heater Control Assembly Instructions|Page 6834
Page 1
background image

Air Door Cable: Adjustments

1. SET A/C CONTROL DIAL AND LEVER IN THESE CONDITIONS:

a. Air inlet control lever at "FRESH" position
b. Temperature control dial at "MAX. COOL" position

2. ADJUST AIR INLET CONTROL CABLE

a. Pull out the inner of air inlet cable and hit the link of blower unit on the link stopper.
b. Set the cable connector to lever pin and clamp the cable outer.

3. ADJUST AIR MIX CONTROL CABLE

Set the cable connector to air mix link pin on left side of A/C unit and clamp the cable outer on.

Air Duct > < A/C - Heater Control Assembly Instructions|Page 6834