Camry LE Sedan 4-Door L4-2164cc 2.2L DOHC MFI (1997)
Control Assembly: Testing and Inspection
System Inspection Procedures
1. INSPECT A/C INDICATOR OPERATION
a. Connect the positive (+) lead from the battery to terminal 2 and the negative (-) lead to terminal 1.
b. Push the A/C button in and then check that the indicator lights up.
If operation is not as specified, replace the switch.
2. INSPECT DIMMING OPERATION
a. Connect the positive (+) lead from the battery to terminal 2 and the negative (-) lead to terminal 1 while press the switch.
b. Connect the positive (+) lead from battery to terminal 4 and then check that the indicator dims.
If operation is not as specified, replace the switch.
3. INSPECT A/C SWITCH CONTINUITY
Switch continuity:
If continuity is not as specified, replace the switch.
Illumination circuit:
If continuity is not as specified, replace the bulb.