Camry LE Sedan 4-Door L4-2164cc 2.2L DOHC MFI (1997)
Evaporator Core: Service and Repair
Evaporator
REMOVAL
1. REMOVE A/C UNIT
2. REMOVE EXPANSION VALVE
3. REMOVE EVAPORATOR
a. Remove the grommet from the evaporator.
b. Using a knife, cut off each packings.
c. Remove the 12 screws and separate the heater cases, then remove the evaporator.
HINT:
^
If evaporator was replaced, add compressor oil to compressor.
Add 40 - 50 cc (1.4- 1.7 fl.oz.)
Compressor oil:
ND-OIL 8 or equivalent
^
If heater cases are separated, water seal should be thrown away.
d. Release the 4 claws and remove the plate from the evaporator.
INSTALLATION
Installation is in the reverse order of removal.
NOTE: The packing for water seal should be with a new one when the heater cases are reassembled.
