Camry LE Sedan 4-Door L4-2164cc 2.2L DOHC MFI (1997)
12. Remove camshaft timing pulley
a. Using SST, loosen the pulley bolt.
SST 09249-63010, 09960-10010 (09962-01000, 09963-01000)
b. Remove the bolt and timing pulley.
13. Remove crankshaft pulley
a. Using SST (and bolt), loosen the pulley bolt.
SST 09213-54015 (91651-60855 for type A), 09330 - 00021
NOTE:
^
Either of 2 types of pulley may be used, each with its own bolt size, type A and type B. When using bolt type B. a plate washer must be
inserted between the bolt and SST.
^
When re-using timing belt, after loosening the crankshaft pulley bolt, check that the timing belt match marks aligns with portion A of the
No.1 timing belt cover when the crankshaft pulley groove is aligned with the timing mark "O" of the No. 1 timing belt cover. If the match
marks does not align, align as follows:
When match marks is misaligned clockwise:
^
Align the match marks by pulling the timing belt up on the water pump pulley side while turning the crankshaft pulley
counterclockwise.