toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

All Other Service Bulletins for Suspension Strut / Shock Absorber: > < Suspension - Rear Axle/Shock/Coil Reminder, ABS
Page 1
background image

Suspension Strut / Shock Absorber: All Technical Service Bulletins
Suspension - Rattle/Popping Noise From Front

Ref.: SUSPENSION

No.: SUOO7-96

Date: DECEMBER 27, 1996

Model: CAM, AVL

Title: RATTLE/POPPING SUSPENSION NOISE

On some vehicles, rattling or popping noises can be heard coming from the front suspension at low mileage. In most cases these noises have been traced
to the upper strut cushion attachment to the strut tower. The upper surface of the tower is covered with a seam sealer prior to painting which becomes
compressed when the upper strut mounting nuts are torqued. This causes the upper strut mounting nuts to be improperly torqued.

To address individual customer complaints of the condition described, please utilize the following repair procedure.

REPAIR PROCEDURES:

If rattling or popping noises can be heard, remove the upper strut mounting nuts one at a time, remove any built up sealer and retorque the nuts.

NUT TORQUE VALUES:

Camry and Avalon:

80 N.m (820 kgF, 59 ft. lbs.)

WARRANTY INFORMATION:

All Other Service Bulletins for Suspension Strut / Shock Absorber: > < Suspension - Rear Axle/Shock/Coil Reminder, ABS